Disruptions to powder supply - AP70N
4 February 2014
We regret to inform reloaders that, due to an ongoing issue affecting the production of AP70N, we will not be able to supply AP70N until the middle of 2014. Please note that none of our other powders are affected, we continue to produce and stock our entire range of reloading powders. We regret any inconvenience caused by this disruption.
Disruptions to powder supply
6 June 2013
ADI Powders are aware that some of our customers may have lately experienced some difficulty in getting hold of some of our powders. We are aware of some temporary disruptions to powder supply at the moment, resulting in a few localised powder shortages. These disruptions are due to a combination of several factors, including regulatory changes, operational changes by transport contractors, and changes to our distribution arrangements. We are working with our distributor to address the issues created by these changes.
Bench Mark 8208 launches at Shot Show
13 June 2012
ADI Powders is launching its extruded Bench Mark 8208 propellant at this week's Shot Show in Sydney, responding to consumer demand for a product that has gained significant plaudits overseas.
This short grain reloading powder is already a hit in the US, where it has quickly acquired a deserved reputation among serious shooters for accuracy and stability over a wide temperature range.
The secret to the powder's success is found in ADI Powders' legendary Ballistic Temperature Independence properties. Closely guarded manufacturing techniques, developed over many decades supplying military-grade powders, ensure that Bench Mark 8208 performs with rock-solid consistency in extreme heat and cold, easing the burden performance shooters face when dealing with changing temperatures.
As with all ADI reloading powders, Bench Mark 8208 will maintain consistency from lot to lot, meaning that a load developed for this powder will need less tweaking when moving to a newly-bought can. This consistency is the result of a stringent manufacturing process that focuses on quality from start to finish, and is governed by military production standards. Every lot of ADI sporting powder is tested for ballistic performance using specialised proof barrels.
Bench Mark 8208 is now available at retailers across Australia, and is perfected for today's most popular match, varmint and hunting rounds. For a full list of suggested calibres and reloading data, please visit www.adi-powders.com.au/handloaders-guide or ask your ADI propellant stockist for a reloading data sheet for ADI Bench Mark 8208.
5th edition Handloaders' guide released
3 June 2010
The 5th edition of the ADI Powders Handloaders' Guide is now available, click here to download.
New pistol cartridges data added....
27 October 2009
Reloading data for 18 new pistol cartridges has been added to our comprehensive range. The new cartridges include: 6.5mm TCU, 6.5mm BR, 6.5mm JDJ, 270 Ren, 7-30 Waters, 327 Federal Magnum, 38 Short Colt, 38 Long Colt, 35 Remington, 9 x 18mm Makarov, 375 Super Mag, 44 Colt, 44 Russian,
445 Super Mag, 45 GAP, 45 Super, 450 Extreme and 480 Ruger. In addition new data has also been added to some existing pistol calibres.
New rifle cartridges data added....
20 July 2009
Reloading data for 9 new rifle cartridges has been added to our comprehensive range. The new rifle cartridges include: 20 Tactical, 221 Fireball, 22 BR Remington, 257 Kimber, 6.5mm BR, 6.5 x 50mm Japanese, 300 Ruger Compact Magnum, 338 Ruger Compact Magnum and 376 Steyr. In addition new data has also been added to some existing rifle calibres.
More data added!
19 December 2007
Reloading data for the 460 S&W Magnum pistol cartridge and 14 new rifle cartridges has been added to our extensive range of data. The new rifle cartridges include 338 Federal, 7mm BR Remington, 325 WSM, 6.8 SPC Remington, 257 Weatherby Magnum, 17 Remington Fireball, 348 Winchester,
338-378 Weatherby Magnum, 280 Ackley Improved, 40-65 Winchester, 405 Winchester, 9.3mm x 74R, 375 Ruger and 308 Marlin Express.
New propellant Trail Boss released
17 July 2007
After unprecedented success within the U.S single action shooting market - including the prestigious SASS WOOLY "Product of the year" award - Trail Boss will be available to the Australian re-loader from mid-August 2007.
After six years development, and using advanced design technology, Trail Boss is perfectly suited to the low velocity projectile loads used in single action shooting. Trail Boss allows high loading volumes of between 50 to 100% in normal applications - this yields reduced position sensitivity and decreased velocity variation - not to mention enhanced safety since double-loading becomes almost impossible. This innovative propellant also achieves superior flow characteristics even though it has a reduced bulk density. And, it has an absolutely unique appearance that makes it extremely difficult to mistake this propellant for any other.
Please follow the attached links and read the rave reviews and comments from prestigious U.S shooting magazines on this new and revolutionary propellant.
AR2206H replaces AR2206
11 July 2007
Propellant AR2206H is finally set to replace AR2206 on the Australian & New Zealand reloading market. AR2206H is an improved variation of AR2206, and is designed to optimise heavy projectile performance where it increases projectile velocity while at the same time reduces chamber pressures. It is suitable for use in a similar range of calibres and powder loads as AR2206.
AR2206H was released into the North American market in 1999, and is distributed by the Hodgdon Powder Co. under the brand name H4895. This powder has proven to be extremely popular in the USA due to its superior loading consistency and its unrivalled performance stability in severe temperature variations. Distribution to such a demanding and variable market also means that we can offer more reloading data to cover your favourite calibre-projectile combinations. Australian handloaders can now experience the many benefits of reloading with AR2206H.
Colour change of AR2205
10 May 2007
The colour of AR2205 has been made darker to align its appearance with other ADI sporting propellants sold in the US market. The change in colour has not changed the powder's ballistic performance therefore reloading data using AR2205 does not need to be altered.
Review of pack sizes for rifle powders
24 November 2006
ADI has recently reviewed propellants and the pack sizes offered in the Australian and New Zealand commercial markets. Due to low volume sales of 4kg packs of AR2205, AR2213SC and AR2217, it has been decided to offer these products in the 500 gram container only. Bench Mark 1, Bench Mark 2, AR2219 and AR2225 will also be available in the 500g pack only. However due to increase popularity of the propellant AR2206H, it will now be available in the 500g and the 4kg container sizes.
4th edition Handloaders' Guide news release
16 December 2004
The 4th edition of the ADI Powders Handloaders' Guide is now available, click HERE for more information
New Propellant AR2225 released.
6 October 2004
This new ADI propellant has a very slow burning rate and is optimised for the 300 Remington Ultra Magnum cartridge. It is also suitable for large capacity magnum cases and small overbore cartridges.
New Single Action Data!
6 September 2004
Reloading data for propellant AR2206H has been included in calibres 30-30 Winchester, 38-55 Winchester and 45-70 Government. The rifle cartridges 45-120 Sharps and 50-140 Sharps have also been introduced to our range.
30 August 2004
Reloading data for 14 new rifle cartridges has been introduced to our comprehensive range. The new rifle cartridges include: 204 Ruger, 223 WSSM, 243 WSSM, 270 WSSM, 7mm WSM, 7mm Remington Ultra Mag, 300 Remington SA Ultra Mag, 7mm Remington SA Ultra Mag, 338 Remington Ultra Mag, 6mm-250, 6.5-284, 338 Lapua Mag, 375 Remington Ultra Mag, 450 Marlin.
New propellant AR2206H released.
18 August 2004
This new ADI propellant has a burning rate slightly slower than the AR2206 powder and is in between the AR2206 and AR2208 powders. It is a very versatile powder in a range of calibres giving outstanding accuracy.
New propellant AR2219 released.
18 May 2004
This new ADI propellant was originally developed for the Australian Defence Force for use in 5.56mm weapons. The burning rate for AR2219 lies between Bench Mark 1 and Bench Mark 2. This propellant offers excellent accuracy, repeatability and reliability in small and medium capacity cartridges.